3 ORIGINALS

This chapter explains how to place originals in the automatic document feeder and on the document glass.

PLACING THE ORIGINAL

PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER

This section explains how to place originals in the automatic document feeder.

Allowed original sizes

Minimum original size

Maximum original size

 

 

Standard sizes

Standard sizes

(Minimum size that can be automatically detected)

(Maximum size that can be automatically detected)

8-1/2" (height) x 5-1/2" (width)

11" (height) x 17" (width)

A5: 210 mm (height) x 148 mm (width)

A3: 297 mm (height) x 420 mm (width)

Non-standard sizes

12" x 18" size paper (A3W) cannot be used.

(Minimum size that can be specified manually)

Non-standard sizes

5-1/8" (height) x 5-1/2" (width)

(Maximum size that can be specified manually)

131 mm (height) x 140 mm (width)

Copy mode: 297 mm (height) x 432 mm (width)

 

Image send mode: 11" (height) x 31-1/2" (width)

 

297 mm (height) x 800 mm (width)

 

 

When a non-standard size original is placed in copy mode, see "SPECIFYING THE ORIGINAL SIZE" in the Copier Guide.

When a non-standard size original is placed for fax or scanner transmission, see "IMAGE SETTINGS" in the Facsimile Guide or Scanner Guide.

Allowed original weights

1-sided scanning: 9 lbs. to 34 lbs. (35 g/m2 to 128 g/m2)

2-sided scanning: 15 lbs. to 34 lbs. (50 g/m2 to 128 g/m2)

To scan originals from 9 lbs. to 14 lbs. (35 g/m2 to 49 g/m2), use "Slow Scan Mode" in the special modes. Scanning without using "Slow Scan Mode" may result in original misfeeds.

When "Slow Scan Mode" is selected, automatic 2-sided scanning is not possible.

 

Make sure an original does not remain

 

on the document glass.

1

Open the automatic document feeder, make sure that an

original is not on the document glass, and then gently close the

 

automatic document feeder.

44