Sharp MX-7001 manual 428

Changing the format (Internet fax mode)

The file format for sending an Internet fax is normally set to [TIFF-F]. If the destination Internet fax machine does not support full mode (it only supports simple mode), follow the steps below to select [TIFF-S].

(1)

Scan

Internet Fax

Fax

USB Mem. Scan

PC Scan

Address Book

Original

Scan:

Auto

8½x11

Send:

Auto

Address Entry

Exposure

Auto

Send Settings

1

Resolution

200X100dpi

Address Review

File Format

TIFF-F

File

Special Modes

Quick File

I-Fax Manual

Reception

(2)

Switch to Internet fax mode and display the file format settings screen.

(1)Touch the [Internet Fax] tab.

(2)Touch the [File Format] key.

			(1)	(2)			Select the file format.
							(1)	Touch the key of the desired format.
	Internet Fax/File Format					OK
								If you selected [TIFF-F], select the compression mode.
2							(2)	Touch the [OK] key.
		File Type		Compression Mode
		TIFF-S	TIFF-F		MH (G3)
					MMR (G4)

When [TIFF-S] is selected, the transmission settings are restricted as follows:

• Resolution:	The selections are [200X100dpi] and [200X200dpi]. If [TIFF-S] is selected after [200X400dpi],
	[400X400dpi] or [600X600dpi] is selected, the resolution automatically changes to [200X200dpi].
• Send size:	Always 8-1/2" x 11"R (A4R). If [TIFF-S] is selected after the send size is changed, the send size is
	automatically changed to 8-1/2" x 11"R (A4R). If a size larger than 8-1/2" x 11" (A4) is scanned, the size
	will automatically be reduced to 8-1/2" x 11"R (A4R). When this format is included in a broadcast
	transmission, the image will be transmitted to all destinations at 8-1/2" x 11"R (A4R).

•Special modes: When a ratio setting is selected and the original size is entered, Dual Page Scan, Card Shot, 2in1, and Mixed Size Original cannot be used.

System Settings (Administrator): Compression Setting

This is used to set the default compression mode for Internet fax transmission.

68