Replacing the staple cartridges in the saddle stitch unit
1
2
3
4
5
6
Open the front cover.
Grasp the handle on the saddle stitch unit and pull it slowly out until it stops.
Pull the staple unit in the saddle stitch unit out and then rotate it up.
Grasp the left and right side of each empty staple cartridge and remove the cartridges.
Load new staple cartridges.
Replace both staple cartridges.
Remove the cover from each staple cartridge and then install the cartridge.
Pull the staple unit of the saddle stitch finisher forward and then rotate it back to its original position.
53