Load 12" x 18" (A3W) paper.

 

• Pull out the extension tray, adjust the guides to the width of

 

12" x 18" (A3W) paper, and place the paper in the bypass

 

tray.

 

After loading the paper, configure the bypass tray settings as

4

explained in "MAKING COPIES USING THE BYPASS

TRAY" (page 41).

 

• To load 12" x 18" (A3W) paper in tray 3, tray 4, or the large

 

capacity tray (MX-LCX3), see "2. LOADING PAPER" in the

 

User's Guide. After loading 12" x 18" (A3W) paper in one of

 

the above trays, select the tray as explained in "PAPER

 

TRAYS" (page 14).

Press the [COLOR START] key ()

or

 

or the [BLACK & WHITE START] key

 

().

5

To cancel scanning and copying...

Press the [STOP] key ( ).

Copying will begin.

If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original.

•The original must be placed on the document glass.

•The copy ratio is 100% when this function is used. The ratio cannot be changed.

•The punch function cannot be used.

To cancel 11x17 Full Bleed...

Touch the [11x17 Full Bleed] key in the screen of step 3 so that it is not highlighted.

112