SENDING AN IMAGE IN USB MEMORY MODE

Follow the steps below to send a scanned image to a commercially available USB memory device that has been connected to the machine. This stores the file in the USB device.

• Consult your dealer or retailer for USB memory devices that can be used.

• When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed. To switch to USB memory mode, touch the [Cancel] key in the touch panel and then follow the steps below.

Connect the USB memory to the USB connector (Type A) on the machine.

1

Original size detector

Place the original.

Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size.

• When placing the originals, orient them as shown below.

 

Originals

Document feeder tray

 

Place the original face up.

 

 

 

Portrait orientation*

 

2

 

1

 

1

 

Landscape orientation

1

1

Document glass

Place the original face down and align the corner with the tip of the arrow mark in the top left corner of the document glass scale.

1

1

*To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the placement orientation in step 4.

•Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation (). If placed in landscape (horizontal) orientation (), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size manually.

•Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission.

37