INITIAL SETTINGS
11 | 12 |
2
21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 |
15 [SPEAKER] key |
|
|
|
| 23 | [ ] key |
|
Press this key to begin manual dialing. (To close the line, press the [SPEAKER] key again.)
16LINE STATUS indicator
Lit when sending/receiving faxes, blinking when receiving data.
17[MODE SELECT] key / Mode indicators
Press this key to select the mode. The indicator of the selected mode lights (copy, printer, scanner, fax mode indicators).
18RSPF indicator
This lights up when an original is placed in the RSPF.
19Error indicator
This lights steadily or blinks when a paper misfeed or other error occurs.
20Tray location indicator
Indicates the selected paper tray. The indicator blinks when the tray is out of paper or is not closed.
21[MENU] key
Press this key to configure a user program.
22[ 
] key ( 
), [ 
] key ( 
), [ENTER] key
Press the [ 
] key ( 
) or [ 
] key ( 
) to select an item in a function setting menu.
Press the [ENTER] key to enter a selection.
Press this key to enter symbols during a name storing procedure.
Press the "
" key to change from pulse dialing to tone dialing mode.
24Numeric keys
Press these keys to dial numbers, and enter numbers and letters during number/name storing procedures.
25[#] key
Press this key to enter symbols during a name storing procedure. The [#] key scrolls through symbols in the opposite direction of the [
] key. When dialing, press this key after you are finished scanning originals into memory from the document glass.
26[CLEAR ALL] key ( 
)
This returns all functions to the default settings. When pressed in a setting menu, this returns the settings and display to the initial state.
27[START] key ( 
)/ indicator Used for the following:
•To begin sending a fax.
•Reading an original into memory from the document glass.
•Manually receiving a fax.
•Entering and setting information.
28Power save indicator
This lights up when the power save function is activated.
15