USER PROGRAMS FOR THE NETWORK EXPANSION KIT
When the network expansion kit is installed in the machine, the following programs are added to the user programs for Print mode.
The IP address and other network settings are configured using these user programs.
Note
The procedure for selecting a user program setting is explained in "SELECTING A SETTING FOR A USER PROGRAM" in the operation manual.
Program |
| Settings (factory |
| |
Program name | default settings | Explanation | ||
number | ||||
| appear in bold) |
| ||
|
|
| ||
|
|
|
| |
|
|
| This program must be enabled to use the | |
|
| 1: YES | machine on a TCP/IP network. "IP ADDRESS | |
4 | ENABLE TCP/IP | SETTING" must also be configured. | ||
2: NO | ||||
|
| This program is initially enabled (factory default | ||
|
|
| ||
|
|
| setting). | |
|
|
|
| |
|
|
| If "YES" is selected (factory default setting) and | |
|
| 1: YES | the machine is connected to a TCP/IP network, | |
5 | ENABLE DHCP | the IP address will be acquired automatically. | ||
2: NO | ||||
|
| If you will manually assign an IP address using | ||
|
|
| ||
|
|
| "IP ADDRESS SETTING", select "NO". | |
|
|
|
| |
|
|
| This program is used to set the IP address (IP | |
|
|
| address, Subnet Mask, and Gateway) of the | |
| IP ADDRESS | • IP ADDRESS | machine when TCP/IP protocol is used on the | |
6 | • SUBNETMASK | network. | ||
SETTING | ||||
| • DEFAULT GATEWAY | When "ENABLE DHCP" is selected, the | ||
|
| |||
|
|
| machine will obtain an IP address | |
|
|
| automatically. This is the factory default setting. | |
|
|
|
| |
|
|
| This program must be enabled to use the | |
| ENABLE | 1: YES | machine on a network that uses NetWare | |
7 | protocol. | |||
NETWARE | 2: NO | |||
| This program is initially enabled (factory default | |||
|
|
| ||
|
|
| setting). | |
|
|
|
| |
|
|
| This program must be enabled to use the | |
| ENABLE | 1: YES | machine on a network that uses EtherTalk | |
8 | protocol. | |||
ETHERTALK | 2: NO | |||
| This program is initially enabled (factory default | |||
|
|
| ||
|
|
| setting). | |
|
|
|
| |
|
|
| This program must be enabled to use the | |
| ENABLE | 1: YES | machine on a network that uses NetBEUI | |
9 | protocol. | |||
NETBEUI | 2: NO | |||
| This program is initially enabled (factory default | |||
|
|
| ||
|
|
| setting). | |
|
|
|
|
- 9 -