CONVENIENT COPY FUNCTIONS

Using the document glass (AR-208D only)

1

2

Place the original that you wish to copy onto the front side of the paper on the document glass and close the RSPF.

Press the [2-SIDED COPY] key until "1 TO

2-SIDED

COPY

2" appears, and then press the [ENTER]

1 TO 2

 

 

 

key.

 

 

3 Press the [] key ( ) or [] key () to select the binding edge and then press the [ENTER] key.

Select "LONG EDGE" or "SHORT EDGE". The "LONG EDGE" and "SHORT EDGE" are shown in the illustration on the preceding page.

BINDING EDGE LONG EDGE

4

Select the number of copies and any other settings, and then

4

press the [START] key ( ).

"[START] : NEXT SCAN [#] : START PRINT" appears and the original is scanned into memory.

To immediately print the scanned image, press the [ ] key.

5 Replace the original with the next original and close the RSPF, and then press the [START] key ( ).

Repeat step 5 until all originals have been scanned.

Copies will be output each time two originals have been scanned.

When the number of original pages is odd and "[START] : NEXT SCAN [#] : START

1

2

The first original The second original

PRINT" appears, press the [] key after all pages have been scanned.

• If you need to clear the data scanned into memory, press the

Note [CLEAR] key ( ). When the [CLEAR] key ( ) is pressed, the number of copies setting is also cleared.

•To cancel automatic two-sided copying, press the [CLEAR ALL] key

() or press the [2-SIDED COPY] key, select the "1 TO 1", and then press the [ENTER] key.

•If the special function sort mode was selected in step 4, copying will not begin until the [] key is pressed.

27