INITIAL SETTINGS

8 Press the [ENTER] key.

9 Press the [MENU] key.

Press the [MENU] key to exit.

SETTING THE DATE AND TIME

The date and time that appear in the display are printed at the top of each page you transmit. Set the date and time by pressing the keys on the operation panel as shown below.

If you enter an incorrect number, press the [CLEAR] key ( ) and re-enter the number.

The time can be displayed in 12-hour or 24-hour format. "Month/Day/Year", "Day/Month/Year" or "Year/Month/Day" can be selected for the order of display of the date.

Use the following procedure to set the date and time:

1 Press the [MENU] key.

2 Press the [] key () or [] key () until "2:ENTRY MODE" appears, and then press the [ENTER] key.

Selection

"2:ENTRY MODE"

3 Press the [] key () or [] key () until "2:DATE&TIME SET" appears, and then press the [ENTER] key.

Selection

"2:DATE&TIME SET"

4 Enter the year, month, and day with the numeric keys and then press the [ENTER] key.

5 Enter the time with the numeric keys.

6 Press the [] key () or [] key () to select "AM" or "PM".

When 24-hour format is selected, do not perform this step.

7 Press the [ENTER] key.

8 Press the [MENU] key.

Press the [MENU] key to exit.

22