INITIAL SETTINGS
SETTING UP THE MACHINE FOR USE WITH A PC MODEMThe machine is set to automatically begin reception if you pick up from an extension telephone and the machine detects a fax tone. However, if you are using a modem on the same line, you must deactivate this function: otherwise the machine will mistakenly attempt to receive the transmission from your computer. To turn off the Fax Signal Receive function, follow the procedure below.
Note | If you turn off the Fax Signal Receive function, be sure to activate the Remote Reception function. See "USING | |
THE REMOTE RECEPTION FUNCTION" on page 39 for details on how to do this. | ||
| ||
|
|
1 Press the [MENU] key.
2 Press the [
] key (
) or [
] key (
) until "4:USER PROGRAM" appears, and then press the [ENTER] key.
Selection
"4:USER PROGRAM"
3 Press the [
] key (
) or [
] key (
) until "15:FAX SIGNAL RCV" appears, and then press the [ENTER] key.
Selection
"15:FAX SIGNAL RCV"
4 Press the [
] key (
) or [
] key (
) to select "1:ON" or "2:OFF".
Select "1:ON" to enable the function.
Select "2:OFF" to disable the function.
5 Press the [ENTER] key.
6 Press the [MENU] key.
Press the [MENU] key to exit.
38