MAC OS 9.0 - 9.2.2
10 | Select the PPD file. |
| 13 | Select the machine configuration. |
|
|
|
|
|
(1)
(2)
(1)Click the PPD file for your model.
(2)Click the "Select" button.
• If the above dialog box does not
Note appear and you return to the "Chooser" dialog box, follow these steps to select the PPD file manually.
(1)Make sure that the machine is selected in the "Select a PostScript Printer" list, and then click the "Setup" button followed by the "Select PPD" button.
(2)Select the PPD file for your model and click the "Open" button.
(3)Click the "OK" button.
•The PPD file is installed in the "Printer Descriptions" folder in the "Extensions" folder.
11 Make sure that the machine is selected in the "Select a PostScript Printer" list and then click the "Setup" button.
12 Click the "Configure" button.
(1)
(2)
(1)Select the options that are installed on the machine.
(2)Click the "OK" button.
14 Click the "OK" button in the window of step 12 to close the window.
15 Click the close box (
) to close the "Chooser".
This completes the configuration of the printer driver.
Installing the screen fonts
The screen fonts for Mac OS 9.0 - 9.2.2 are contained in the "Font" folder of the "PRINTER UTILITIES"
If you experience problems that may Note be due to the installed screen fonts, immediately delete the installed fonts
from the system.
Macintosh
To automatically configure the settings Note based on the installed machine
options that are detected, click the "Auto Setup" button.
- 24 -