USER SETTINGS

Print mode

Program

 

Setting codes

 

 

Program name

(factory default

 

Explanation

number

setting appears

 

 

 

 

 

 

in bold)

 

 

 

 

 

• When this function is enabled,

 

 

 

 

printing in printer mode will

 

 

 

 

automatically continue using a

1

FORCED

1: ON

 

different size of paper if the

OUTPUT

2: OFF

 

specified size of paper runs

 

 

 

 

 

 

out in all trays. This feature

 

 

 

 

does not function in copy

 

 

 

 

mode.

 

 

 

 

 

 

 

 

•

This sets the USB 2.0 data

 

 

 

 

transfer speed. To obtain the

 

 

 

 

fastest speed when using the

 

 

 

 

USB 2.0 connector, first verify

 

 

 

 

that your computer meets the

 

 

 

 

system requirements

 

USB 2.0 MODE

1: FULL-SPEED

 

(operating system and driver),

2

 

and then use this program to

SWITCH*1

2: HI-SPEED

 

change the USB 2.0 mode to

 

 

 

 

 

 

"Hi-Speed". Note that the

 

 

 

 

setting should not be changed

 

 

 

 

while running a TWAIN driver.

 

 

 

 

(For the system requirements,

 

 

 

 

see "System requirements for

 

 

 

 

USB 2.0 (Hi-Speed mode)"

 

 

 

 

(p.49).)

 

 

 

 

 

 

 

 

•

If the paper runs out during

 

 

 

 

printing and there is paper of

 

AUTO TRAY

1: ON

 

the same size in another tray,

3

 

this function automatically

SWITCH*2

2: OFF

 

 

 

switches to that tray

 

 

 

 

 

 

 

 

(excluding the bypass tray).

 

 

 

 

The function can be disabled.

 

 

 

 

 

*1 The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably.

*2 When the 250-sheet paper feed unit is installed.

58