APPENDIX
Fusing system | Heat rollers |
| |||
Developer system | Magnetic brush development |
| |||
Light source | Cold cathode fluorescent lamp |
| |||
(CCD: 3 components; R, G, and B) | |||||
| |||||
Resolution | Scan: 600 x 300 dpi Output: 600 x 600 dpi(AUTO/TEXT mode) | ||||
Scan: 600 x 600 dpi Output: 600 x 600 dpi(PHOTO mode) | |||||
| |||||
Gradation | 256 tones (8 bits) |
| |||
Power supply | 120 V, 60 Hz, 8.0 A |
| |||
Power consumption | Max. 1.0 kW |
| |||
Space requirements | 31.6" (W) x 17.6" (D) (802 mm (W) x 445 mm (D)) | ||||
(with trays extended) | |||||
Weight*4 | Approx. 43.9 lbs. (19.9 kg) |
| Approx. 45.4 lbs. (20.6 kg) | ||
Dimensions | 20.4" (W) x 17.6" (D) x 14.6" (H) | ||||
(518 mm (W) x 445 mm (D) x 371 mm (H)) | |||||
| |||||
Operating | Temperature: 50°F to 86°F (10°C to 30°C) | ||||
conditions | Humidity: 20% to 85% |
| |||
| Sound Power Level LwA(1B=10dB) | ||||
| Copying: 6.2[B] |
| |||
| Standby: 3.2[B] |
| |||
| Sound Pressure Level LpA (bystander positions) | ||||
Noise level | Copying: 48[dB(A)] |
| |||
Standby: 17[dB(A)] |
| ||||
|
| ||||
| Sound Pressure Level LpA (operator position) | ||||
| Copying: 52[dB(A)] |
| |||
| Standby: 17[dB(A)] |
| |||
| Noise emission measurement in accordance with ISO 7779. | ||||
Emission |
|
|
|
| |
concentration | Ozone: | 0.02 mg/m3 or less |
| ||
(measured |
| ||||
Dust: | 0.075 mg/m3 or less |
| |||
according to RAL- | Styrene: | 0.07 mg/m3 or less |
| ||
UZ62 : Edition Jan. |
|
|
|
| |
2002) |
|
|
|
| |
|
|
|
|
|
*1 When making multiple duplex copies, the copy speed will vary based on the environment conditions.
*2 The
The
The time from power off until the first copy is output varies depending on the installation site and the state of the machine in use.
*3 The
*4 Not including toner cartridges.
83