LOADING PAPER
Loading paper in the bypass tray
• Paper must be fed narrow side first into the feed slot.
Note • Special papers such as transparency film, labels, and envelopes must be fed one sheet at a time through the bypass tray.
• When copying onto transparency film, remove each copy promptly. Do not let copies stack up.
1 Open the bypass tray and extend the tray.
To close the bypass tray, perform step 1 and then step 2 in the
Note | illustration and push the round projections at the right of the tray |
| |
| until they click. |
| 2 |
| 1 |
2 Set the bypass tray paper guides to the paper width. Insert the paper (print face down) all the way into the bypass tray.
Print face
3 Press the [TRAY SELECT] key (
) to select the bypass tray.
Note for loading thick paper
Copying on thick paper requires higher fusing temperature setting. Set the user program 29 to "2 (HEAVY PAPER)" when using thick paper. (See page 57.)
18