Copies can be reduced down to 25% or enlarged up to 400%. (When the RSPF is being used, the zoom copy ratio range is 50% to 200%.) The [COPY RATIO] key can be pressed to quickly select a ratio from among eight preset ratios. In addition, the [
] key (
) and [
] key (
) can be pressed to select the ratio in increments of 1%.
1 | Place the original(s) and check the paper size. |
|
2 | Press the [COPY RATIO] key. | COPY RATIO |
- 100% +
3
3 Press the [COPY RATIO] key and/or [
] key (
) or [
] key (
) to select the desired copy ratio and then press the [ENTER] key.
Selecting a preset ratio
The preset ratios change as follows each time the [COPY RATIO] key is pressed:
"100%" → "78%" → "64%" → "50%" → "25%" → "400%" → "200%" → "129%"
8.5x14 TO 8.5x11 - 78% +
Fine adjustment of the ratio
The ratio can be adjusted from 25% to 400% in increments of 1%.
Use the [
] key (
) or the [
] key (
) for fine adjustment.
ZOOM
- 99% +
• To return the ratio to 100%, press the [COPY RATIO] key until 100%
Note appears.
•Press the [COPY RATIO] key to set the approximate ratio, then press the [
] key (
) or [
] key (
).
•To decrease or increase the zoom ratio rapidly, hold down the [
] key (
) or [
] key (
).
The ratio will stop changing at each of the preset ratios. To continue changing the ratio, release the key and then hold it down again.
4 Select the number of copies and any other copy settings, and then press the [START] key ( 
).
The copy will be delivered to the paper output tray.
25