TROUBLESHOOTING AND MAINTENANCE

Problem

 

Cause and solution

Page

 

 

Copying or printing is performed.

 

 

 

→ Set the paper size after copying or

-

 

 

printing is complete.

 

Paper size for a paper

 

 

The machine has stopped temporarily

 

tray cannot be set.

 

due to running out of paper or a

 

 

 

misfeed.

19, 70

 

 

→ Load paper or remove the misfeed, and

 

 

 

then set the paper size.

 

 

 

 

 

Output does not stack

Both ends of the paper are curled

 

upward.

 

neatly in the paper

 

15

 

→ Turning the paper over in the paper tray

output tray.

 

 

 

may help.

 

 

 

 

 

 

 

 

 

 

"MEMORY FULL, PRESS START TO

 

 

 

RESUME." appears in the display.

 

 

 

→ The memory became full during sort

30

A copy job stops before

copy. Copy only the originals that have

 

it is finished.

 

been scanned to that point, or cancel

 

 

 

the job and clear the data from memory.

 

 

 

 

 

 

 

The tray is out of paper.

15

 

 

→ Load paper.

 

 

 

 

 

 

 

 

 

Other indicators are lit.

 

 

 

→ If other indicators are lit, the machine is

 

 

 

in preheat mode. Press any key on the

13

 

 

operation panel to resume normal

 

The power save

 

operation.

 

indicator is lit.

 

Only the power save indicator is lit.

 

 

 

→ If only the power save indicator is lit, the

13

 

 

machine is in auto power shut-off

 

 

mode. Press the [START] key ( ) to

 

 

 

resume normal operation.

 

 

 

 

 

Error indicator (

) is

See "DISPLAY MESSAGES" to check the

 

meaning of the error indicator and error

61

lit or blinking.

 

message in the display, and take

 

 

 

 

appropriate action.

 

 

 

 

 

 

 

The same power outlet is used for the

 

 

 

lighting fixture and the machine.

 

Lighting fixture flickers.

→ Connect the machine to a power outlet

-

 

 

which is not used for other electric

 

 

 

appliances.

 

 

 

 

 

66