Sharp VL-NZ10S, VL-NZ8S operation manual Memory ARD

			Operation
NO		The card is not inserted or is inserted improperly. Check that it is	References
Displayed for		Description of warning
5 seconds
MEMORY	C ARD	properly inserted (see page 13).
MEMORY	C ARD	The capacity of the card is full and cannot store any more images.
		Delete unnecessary images (see page 73) or replace the card with a
F U L L
		new one (see page 13).
NO DA T A ON		The card has no images recorded in the format the camcorder can
MEMORY	C ARD	recognize.
MEMORY	C ARD	The images in the card are corrupted or recorded in a format which is
		not compatible with this camcorder. Format the card to use it with this
E RROR
		camcorder (see page 70).
F ORMA T	C ARD	The card has not been formatted with this camcorder. Format the card
MEMORY		(see page 70).
MEMORY	C ARD	The card is write-protected (see page 89).
PRO T E C T E D
D A T A		You are trying to delete a protected image. Cancel the protection
P RO T E C T E D		setting (see page 72).
MEMORY	C ARD	The selected image cannot be read by this camcorder. Format the
RE AD E RROR		card to use it with this camcorder (see page 70).
C ANNO T		The card cannot record any data due to a problem with the card or
S T ORE DA T A		data on the card. Replace the card (see page 13).

Note:

•N indicates a flashing display.

8