Inserting a Cassette

1Attach the power source to the camcorder, then slide the cassette compartment door release and open the cassette compartment door.

Cassette compartment door release

2Insert a commercially available cassette fully with the window facing outwards, and with the erasure protect tab facing upwards.

Erasure protect tab

EAVS

C E R

Inserting a Card

1Make sure that the Power switch is set to OFF.

2Slide the card slot cover release and open the card slot cover in the direction of the arrow.

Card slot cover release

3Insert a card into the slot as shown below, and push it in as far as it will go.

Label

Clipped corner

4Close the card slot cover.

3Press the W mark gently until the cassette holder clicks into place.

Wmark

Note:

You can use an SD Memory Card (commer- cially available) and a MultiMediaCard (only supplied with VL-NZ10) for storing still images with this camcorder, not a SmartMediaE card or Memory StickE media.

In this operation manual, “card” refers to the SD Memory Card or the MultiMediaCard.

4Wait for the cassette holder to fully retract. Close the compartment door by pressing the centre until it clicks into place.

ii

Page 5
Image 5
Sharp VL-NZ10S, VL-NZ8S operation manual Inserting a Cassette, Inserting a Card