Soho NBG800 manual LED Indicators, Rear Panel

LED Indicators

LED	Color	Function
Power	Green	Lit: Power ON
		Unlit: Power OFF
Status	Red	Blinking: On power-up the BroadGuard checks
		for proper operation. The checking procedure
		takes only a few seconds
		Lit: If this LED is always lit, the device is not
		working properly. Go to Chapter 4:
		Troubleshooting, page 43
Cable/DSL:	Orange	Lit: Indicates a good connection to a cable/DSL
Link/Activity		modem
		Blinking: Data is being transmitted/received
		to/from a cable/DSL modem
LAN:	Green	Lit/Blinking: Indicates the link status and activity
LAN Ports 1~4	Orange	of 100Mbps Ethernet data
		Lit/Blinking: Indicates the link status and activity
Link/Activity
		of 10Mbps Ethernet data

Rear Panel

Ports on the Rear Panel (Figure 3)

	Figure 3. Rear Panel
LAN Ports	There are four 10/100Base-T Switch ports for linking
	computers or other Ethernet devices, e.g. a hub/switch. When
	linking to other networking devices, we need a cross-over
	cable or an uplink port on that device
Cable/DSL port	An Ethernet 10Base-T port is used for linking to the Ethernet
	SOHOware® Secure Cable/DSL Router 3