Soho NBG800 manual DSL Broadband Connection

Connect-on-demand---This setting allows the BroadGuard to automatically make a connection to your BSP whenever you launch an Internet application. The default setting is “Yes”.

Maximum Idle Time Before Disconnecting --- If there is no activity on the connection longer than the time set here, the connection will automatically be dropped.

If your Broadband service provider assigns you a static IP address, you must set Use PPPoE DSL Service to NO. Next check Specify an IP Address and enter all IP address information into all fields. If not, you can skip this step.

Figure 37. DSL Broadband Connection

Click Save and Restart to start sharing your broadband connection.

SOHOware® Secure Cable/DSL Router 29