Soho NBG800 manual Refresh, Click Start/Programs/Command Prompt, Windows NT

Figure 57. IP Configuration

step3. Select the network adapter you use to connect to the BroadGuard. Click Release

step4. Click Renew to retrieve new information (IP address, subnet mask, and default gateway address) from the BroadGuard. Click OK to save the changes and exit the program

step5. Go to DHCP IP Address Assignments (see Figure 44, page 35). Click

Refresh

Windows NT 4.0

step1. Click Start/Programs/Command Prompt

Figure 58. Command Prompt-1

step2. Type “ipconfig /release” (Figure 58) and press Enter

step3. Type “ipconfig /renew”, and press Enter to retrieve new information (IP address, subnet mask, and default gateway address) from the BroadGuard (Figure 59)

SOHOware® Secure Cable/DSL Router 45