Figure 86. Local Area connection Properties
step14. On the General card, check Enable IP Router Manager. Click Input Filters. Remove all filters from the list, then click OK. Click Output Filters. Once again, remove all filters from the list, then click OK.
Click OK to close the window and return to the Routing and Remote Access window. Click OK to save and close the Routing and Remote Access window.
These changes make it possible to run any Internet application through this server
That completes the VPN server setup. The next stage is to set permissions for the users access the server
Set User Permissions
step1. Click Start/Settings/Control Panel. In Control Panel,
