C4630 SE
9
Figure 24: C4630 SE IR Remote Control

C4630 SE HOME AUDIO SYSTEM

Optional C4630 SE IR Remote Control

(see Figure 24)

NOTE: The

C4630

SE does

not have a built-in IR

OFF

 

 

 

 

 

OFF

1

 

 

receiver. To

use the

optional

remote control you must

ALL

 

 

 

 

 

ZONE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

f irst connect an IR receiver

(available separately) .

 

 

 

 

VOL+

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

See Main Keypad IR Receiver Holster, on page 19 .

 

 

 

 

MUTE

 

 

 

3

 

 

The buttons on the optional C4630 SE IR remote will perform the

 

 

 

 

VOL-

 

 

 

4

1.

Zone OFF Button

same functions as the correspondingly-named buttons on the Main

 

 

 

SOURCE

 

 

 

 

5

2.

All OFF Button

1

2

3

 

4

 

3.

Zone Volume UP Button

and Numeric Keypads (see Figure 14, on page 18). Additionally,

 

 

 

 

 

 

 

 

 

6

 

 

OK

 

 

 

 

 

 

4.

Zone MUTE Button

the remote also has an ALL OFF button and an OK button.

 

 

 

 

 

 

 

 

 

 

5.

Zone Volume DOWN Button

A LL OFF Button: Pressing the ALL

OFF button will turn-OFF all

1

2

3

 

 

 

7

6.

Zone Source Selector Buttons

 

 

 

 

 

 

 

 

 

 

(Source 1 – Source 4)

 

 

 

 

 

 

P

 

 

8

 

zones in the system, including any zones being run by additional

4

5

6

 

 

7.

OK Button

S

 

 

 

 

 

 

E

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

7

8

9

T

 

 

 

8.

Numeric Buttons;

C4630 SEs that are connected via

their SYNC connections (see

 

 

 

 

 

 

E

 

 

 

 

 

 

 

 

 

 

 

S

 

 

 

 

“+” and “–” Buttons

page 16).

 

 

 

 

 

 

 

 

 

 

 

 

 

9.

 

 

 

_

0

+

 

 

 

 

Zone Source Control Buttons

OK Button: The OK button provides a discrete confirmation command for use with devices requiring that an additional “select” or “enter” command following a numeric button entry.

NOTE: The remote’s keypad is covered with a removable film to protect it during manufacture and shipping.

C4630 SE “Out-Of-The-Box” Functions

Without additional programming via the Sonance Control Manager, the C4630 SE has very limited functionality. The following functions are available “out-of-the-box” through the

C4630 SE Main Keypad (see Figure 14, on page 18) and the optional IR remote:

V O L U M E UP/DOWN : PRESS the VOLUME UP/DOWN buttons.

M ute: PRESS the Mute button to Mute/un-Mute the local zone; PRESS-AND-HOLD the MUTE button to Mute/un-Mute all zones designated for PARTY MODE.

Zone Source Select: PRESS one of the four ZONE SOURCE SELECT buttons to select that source in the local zone. PRESS-AND- HOLD one of the four zone source select buttons to select that source in all zones designated for PARTY MODE. Pressing a SOURCE SELECT button in a zone that is OFF will turn that zone ON.

Zone OFF: PRESS the Zone OFF button to turn the local zone OFF.

The Numeric Keypad will not function unless the C4630 SE is programmed via the Sonance Control Manager.

NOTE: These “Out - Of -The - Box” functions can also be operated from the optional C4630 SE IR Remote Control if an IR receiver is installed in one of the Main Keypads (see page 19) .

23

Page 23
Image 23
Sonance instruction manual Optional C4630 SE IR Remote Control, C4630 SE Out-Of-The-Box Functions