Sonance instruction manual Connecting the C4630 SE, Power Connections, Replacing the AC Fuse

C4630 SE HOME AUDIO SYSTEM

Zone Considerations (continued from page 8)

What is the performance requirement for each zone? Some zones may only require a keypad controller and speakers. Some may need an additional IR receiver. One may need a more flexible keypad and a high-power amplifier. A master suite may require a multi-channel amplifier to distribute audio to the bedroom, bathroom and patio. One or more zones may have local devices that need to be incorporated into the system for control, audio or video. The C4630 SE can be used with several different Sonance keypad controllers and IR receivers, so you can select the ones that are best for each zone.

Connecting the C4630 SE

Power Connections

Power Cord: The C4630 SE features a removable IEC power cord. Plug the female end of the power cord into the Power Cord Connector on the Controller’s rear panel and plug the male end into a grounded wall socket. DO NOT plug the C4630 SE’s power cord into a convenience outlet on any other audio or video component.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT DEFEAT THE THIRD PRONG OF THE POWER CORD PLUG.

Important: Do not plug the power cord into the wall outlet until all system connections have been made and verified.

NOTE: If you need to use an extension cord, use only a heavy - duty (14 - gauge or larger) extension cord to avoid star ving the C4630 SE of all the cur rent necessar y for full - power operation .

Switched AC Outlets: Connect the AC power cords of up to two source components into these outlets. DO NOT modify power strips to fit these outlets by removing their ground plugs.

Replacing the AC Fuse	Source	Source	Source	Source
	Output	Output	Output	Output

The C4630 SE has an 8A, 250V slo-blo AC fuse. To replace the fuse, unplug the power						#1	#2	#3	#4
cord from the Power Cord Connector and use a screwdriver to remove the fuse.							COMMON IR OUT
CAUTION: For continued protection against	fire,	replace	the	fuse	with		SOURCE OUTPUTS
						L
only the same type and rating.
Audio Source Connections						R
	power	cord	from	the	wall
CAUTION: Always unplug the controller’s						L			L-
outlet before making source signal or speaker connections.									L+
									R+
						R			R-
The C4630 SE has input and output connections for four source components.							SOURCE INPUTS
The corresponding SOURCE INPUT and SOURCE OUTPUT connectors are arranged vertically
(see Figure 4). The Source Output connections are buffered.						Source	Source	Source	Source
Source Input Connections						Input	Input	Input	Input
						#1	#2	#3	#4
Connect a stereo RCA audio cable from the left & right line-level audio outputs of a							Figure 4:
source component to one set of left & right Source Input Jacks on the C4630 SE. You can						Source Input/Output
connect up to four source components.							Connections

11