Sonance C4630 SE Front Panel Controls and Indicators, Sonance Control Manager Software

C4630 SE HOME AUDIO SYSTEM

Front Panel Controls and Indicators

(see Figures 25 & 26)

ALL OFF Switch

Pressing the front-panel ALL OFF button will turn all zones OFF. If all zones are already OFF, pressing the ALL OFF switch will have no effect.

•If the system has multiple C4630 SEs daisy-chained via their SYNC Connections (see page 16), pressing the ALL OFF switch on any unit will turn OFF all zones being run by all connected units.

NOTE: After pressing the AL L OF F button wait at least 5 seconds for the microprocessor to reset before turning the unit ON again.

AC ON LED

The AC ON LED illuminates blue as long as the C4630 SE’s power cord is plugged-into a live outlet.

ACTIVE LED

The ACTIVE LED illuminates green whenever any zone run by that C4630 SE is ON.

ZONE STATUS LEDs

ALL OFF ACTIVE A.C. ON

Figure 25: Front-Panel ALL OFF Switch,

ACTIVE and AC ON LEDs

ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6

Figure 26:

Front-Panel ZONE STATUS LEDs

A zone’s ZONE STATUS LED will illuminate green whenever that zone is ON and will extinguish when the zone is OFF.

Sonance Control Manager Software

The C4630 SE comes with a CD-ROM containing the Sonance Control Manager programming software that lets you program all of the C4630 SE’s operational and sonic parameters. In addition to adjusting each zone’s sonic performance you can also program the buttons on keypad controllers to perform individual functions and to combine literally dozens of different functions into macros that can be triggered by a single keypad button push.

NOTE: In addition to programming the C4630 SE, the Sonance Control Manager sof tware can also be used to program the DAB1. DAB1 programming is explained in another document .

Installing the Sonance Control Manager Software

1.Place the included SONANCE CONTROL MANAGER CD-ROM in your computer’s CD drive.

2.The installer will automatically launch. Follow the instructions to install the program. If the installer does not automatically launch:

1.Go to your computer’s START menu and select RUN.

2.Use the BROWSE function to navigate to the SONANCE CONTROL MANAGER CD.

3.Double-click on INSTALLER.EXE and follow the instructions to install the program.

Sonance Control Manager is compatible with these Windows operating systems:

Windows 2000 series

Windows XP Home

Windows XP Professional

Sonance Control Manager is NOT compatible with any Apple/MacIntosh operating system.

24