Sonance instruction manual Renaming C4630 SEs in a System with Multiple Units

C4630 SE HOME AUDIO SYSTEM

6. Open the FI L E menu and
select JOB INFO:
• The DEALER tab (Figure 35)
allows		you	to	record
information			about		the
particular job,				including
system		design		notes,
firmware		upgrades,			etc.
This information				is	not
transferred to the C4630 SE
— it is saved only in the sys-
tem program file in your
computer.
• The CLIENT tab (Figure 36)
gives you a place to record
your	client’s			contact
information,			along		with	Figure 35:	Figure 36:
information			about		the
						JOB INFO Screen DEALER Tab	JOB INFO Screen CLIENT Tab
general	contractor, interior
designer.		etc.		Like	the

DEALER information, the CLIENT information is saved only in the system program file in your computer and is not transferred to the C4630 SE.

Renaming C4630 SEs in a System with Multiple Units

To minimize confusion when programming systems with multiple C4630 SEs we recommend that you rename each unit to identify it, such as “C4630 SE #1 Zones 1-6”, and “C4630 SE #2, Zones 7-12”.

In the SYSTEM WORKSPACE area of the Device screen (see Figure 37), select each C4630 SE in the system and rename each one with a different name.

System

Workspace

Area

Figure 37:

The SYSTEM WORKSPACE Area

28