Sony To stop consecutive editing, 6-2-3Performing Consecutive Editing

6-2-3 Performing Consecutive Editing

After performing automatic editing, the tape in the recorder VTR is automatically rewound to the OUT point. From then, you can set IN and OUT points only for the player VTR to do consecutive edit operations. This is called consecutive editing. The OUT point for the recorder VTR will be the IN point for the next edit.

Previous OUT point=Next IN point

	.
Recorder	Previous edit		Next edit section
VTR	section
Player
VTR
	4		4
		IN point		OUT point

Consecutive editing

Follow the procedure below to perform consecutive editing.

2

To stop consecutive editing

Press the OUT button while holding down the ENTRY button.

Editing 6 Chapter

1 3

Performing consecutive editing

1 Set IN and OUT points for the player VTR.

The recorder VTR automatically sets the last OUT point as the new IN point.

2 Press the PREVIEW button to preview.

3 Press the AUTO EDIT button. Automatic editing starts.

When editing ends, the recorder VTR stops at the OUT point and the player VTR stops two seconds after the OUT point.

Repeat Steps 1 to 3 to perform consecutive editing.

Chapter 6 Editing 6-17