Sony manual 142

Appendix

Menu List

Item number	Item		Settable range			Function
708	CHROMA PHASE		[0]			Specifies the phase rotation domain of the chroma phase
					U/V (composite)
	ROTATION MODE				domain	(hue) control.
			1	Pb/Pr (component)		The output level of SIF, component, and composite signals
				domain		are simultaneously modified in accordance with the
						following modes:
						0: When monitoring the composite output level of the VTR
							with a composite vector monitor (Sony Tektronix 1750
							for DVW-A500/1 and 500/1, and 1751 for DVW-A500P/1
							and 500P/1), rotating the CHROMA PHASE (hue)
							control changes only the chroma phase (hue), but not
							the chroma level.
						1: When monitoring the component output level of the VTR
							with a component vector monitor (Sony Tektronix
							WFM300A), rotating the CHROMA PHASE (hue) control
							changes only the chroma phase (hue), but not the
							chroma level.
709	DECODE Y/C SEP					Specifies the D-1 or Betacam format as the input/output
(DVW-A500/1	MODE					format for analog component signals.
and 500/1 only)							Format	Color Bars	Y video	Y sync	R-Y/B-Y
							D-1 CAV	with 100/0/	700 mV	300 mV	700 mV
								100/0 color
								bars
							Betacam	with 100/	714 mV	286 mV	700 mV
								7.5/77/7.5
								color bars
	Sub item
	0	INPUT CAV	[0]		[B-CAM]	Analog component input format
		LEVEL	1		D-1	0: Betacam format
						1: D-1 format
	1	OUTPUT CAV	[0]		[B-CAM]	Analog component output format
		LEVEL	1		D-1	0: Betacam format
						1: D-1 format
710	INTERNAL VIDEO		[0]		[OFF]	Specifies the type of test signal to be output from the
	SIGNAL		1		100% Color Bars	VTR’s internal test signal generator.
	GENERATOR		2		75% Color Bars	When OFF is selected, no test signal is output and the
			3		75% Reverse Color	VTR operates normally.
					Bars	For settings other than OFF, hold down the lit AUDIO
			4		Bowtie	INPUT/MONITOR SELECT button for 3 seconds or more.
			5		Pulse & Bar	All the AUDIO INPUT/MONITOR SELECT buttons light
			6		Multi Burst	and the internal test signal generator operates. The
			7		H Sweep	selected test signal (1 through 17) is output from the VTR.
			8		5 step	The output signal can also be recorded.
			9		Ramp
			10		Shallow Ramp
			11		Red
			12		50% Flat
			13		100% Flat
			14		Black Burst
			15		SDI Check Field
			16		Line 330
					(DVW-A500P/1 and
			17		500P/1 only)
					Test singal NTC7
					(DVW-A500/1 and
					500/1 only)

A-26Appendix