Sony Items Related to Prerolling (400s)

Items Related to Prerolling (400s)

The values enclosed in a box are factory settings.

Item number	Item	Settable range		Function
401	FUNCTION MODE	[0]	[stop]	Selects the operation mode that the VTR changes to after
	AFTER CUE-UP	1	still	completing a cue up operation.
				0	: Enters stop mode.
				1	: Enters still-picture mode (search mode).

				Note
				When setting the standard constant on the editor and
				control the unit, set to “0.”
403	AUTOMATIC	[0]	[disable]	Specifies whether IN point is automatically set when the
	PREROLL	1	enable	PREROLL button is pressed, in the case no IN point has
	REFERENCE			been set at the start of a preroll operation.
	ENTRY			0	: IN point is not set automatically.
				1	: IN point is set automatically.
404	CUEUP BY TC	0	capstan only	The setting of this item is valid only when the [F1] (TIMER
		[1]	[reel/capstan]	SEL) button in the TC menu is set to TC or UBIT.
				0	: The tape runs with the pinch ON during cue up. (The
					maximum tape speed is ten times normal tape speed.)
				1	: The tape runs with the pinch OFF state during cue up.
					When the tape nears the cue up point and tape speed
					drops to slow, the pinch turns ON.
				Select “0” when the tape contains a discontinuity in its
				time code signal and the part that is prerolled contains the
				discontinuity. (Prerolling is performed by interpolating the
				time code preceding the discontinuity using the CTL
				signals.)
405	CUEUP BY CTL	[0]	[capstan only]	The setting of this item is valid only when the [F1] (TIMER
		1	reel/capstan	SEL) button in the TC menu is set to CTL.
				0	: The tape runs with the pinch ON state during cue up.
					(The maximum tape speed is ten times normal tape
					speed.)
				1	: The tape runs with the pinch OFF state during cue up.
					When the tape nears the cue up point and tape speed
					drops to slow, the pinch turns ONa).
				Select “0” when editing precision has priority.

a)When this unit is controlled by an editor (BVE-2000/BVE-9100, etc), and the seting is “1”, cue up operations are done at high speed.

Appendix

Appendix A-19