Sony Audio, DVW-A500P, DVW-A500/1, Input connectors, Processor adjustment range

Audio

DVW-A500/1

LNG	Metal Tape	Oxide Tape
Frequency	50 Hz to 15 kHz	50 Hz to 15 kHz
response (at 10 dB	+1.0 dB/–2.0 dB	±3.0 dB
below refernce
levela))
S/N Ratio (at 3%	More than 72 dB	More than 50 dB
distortional level)		(Dolby NR off)
Distortion (T.H.D at	Less than 1%	Less than 2%
1 kHz reference
levela))
Wow and flutter	Less than 0.1% rms
AFM
Frequency	20 Hz to 20 kHz +0.5 dB/–2.0 dB
response (at
reference levela))
S/N Ratio (at 3%	More than 85 dB
distortional level)
Distortion (T.H.D at	Less than 0.5%
1 kHz reference
levela))
a) Reference level: + 4 dBm

DVW-A500P

LNG	Metal Tape	Oxide Tape
Frequency	50 Hz to 15 kHz	50 Hz to 15 kHz
response (at 20dB	+1.0 dB/–2.0 dB	±3.0 dB
below peak levela))
S/N Ratio (CCIR	More than 68 dB	More than 62 dB
468-3 weighted, at
3% distortional
level)
Distortion (T.H.D at	Less than 1%	Less than 2%
1 kHz reference
levela))
Wow and flutter	Less than 0.1%
(DIN 45507
weighted)
AFM
Frequency	20 Hz to 20 kHz +0.5 dB/–2.0 dB
response (at
reference levela))
S/N Ratio (at 3%	More than 72 dB (CCIR 468-3
distortional level)	weighted)
Distortion (T.H.D at	Less than 0.5%
1kHz reference
levela))

a)Reference level: +4 dBm

b)Peak level: +8 dB above reference level

Unless otherwise specified, all values in the above table were obtained by measuring analog output signals with Dolby noise reduction circuitry on.

Processor adjustment range

Video level	±3 dB/– ∞ to +3 dB selectable
Chroma level	±3 dB/– ∞ to +3 dB selectable
Setup/Black level	±30 IRE/±210 mV
Y/C delay	±100 ns (in Betacam playback on
	DVW-A500/1 and A500P/1)
Chroma phase	±30°
System phase	Sync: ±15 µs
	SC: ±200 ns

Input connectors

SERIAL V/A INPUT

BNC (1 with active through out) Serial digital (270 Mbits/s) SMPTE 259M/CCIR 656-III

ANALOG I/O VIDEO INPUT REF.VIDEO: BNC (2 in loop through

connection)

Black burst or composite sync

0.3Vp-p, 75 Ω , Sync negative

COMPONENT:BNC (3 for 1 set)

Y:1.0 Vp-p, 75 Ω , Sync negative R-Y/B-Y: 0.7 Vp-p, 75 Ω , with

100% color bar for DVW- A500P/1 and 500P/1 and with 100% or 75% color bar selectable for DVW-A500/1 and 500/1

COMPOSITE:	BNC (2 in loop through
	connection) 1.0 Vp-p, 75 Ω , Sync
	negative (with optional BKDW-

505/506)

AUDIO INPUT (AES/EBU) CH-1/2, CH-3/4 XLR, 3-pin, female (2) AES/EBU format, balanced

AUDIO INPUT CH-1/2/3/4/CUE

XLR, 3-pin, female (5) LOW OFF: –60 dBu, high

impedance, balanced HIGH OFF: +4 dBu, high

impedance, balanced HIGH ON: +4 dBm,600 Ω

termination, balanced TIME CODE IN XLR, 3-pin, female (1)

0.5 to 18 Vp-p, 10 kΩ , balanced

Appendix

Appendix A-3