Sony Items Related to Editing (300s)

Items Related to Editing (300s)

The values enclosed in a box are factory settings.

Item number	Item	Settable range		Function
301	VAR SPEED	[0]	[–1 to +3]	Specifies the variable tape speed range when the variable
	RANGE FOR	1	–1.15 to +3.45	speed playback is executed by a remote control unit
	SYNCHRONIZATION			connected to the REMOTE1 IN (9P) connector.
				0	: –1 to +3 times normal tape speed
				1	: –1.15 to +3.45 times normal tape speed

				Note
				When an editing control unit such as BVE-9000 is
				connected for DT editing, select “1”.
				When “1” is selected and the DT playback at a speed
				exceeding –1 to +3 times nomal tape speed is attempted
				during analog Betacam playback, the bottom of the picture
				may partially disappear. This is not a malfunction.
302	CAPSTAN	[0]	[deceleration]	Specifies whether capstan servo is re-locked in
	RE-LOCKING	1	acceleration	deceleration mode or acceleration mode when the ALT/[F5]
	DIRECTION		(DVW-A500/1 and	(CAP LOCK) button in the HOME menu is set to 4FD
			500/1)	(DVW-A500/1 and 500/1) or 4FD or 8FD (DVW-A500P/1
		0	deceleration	and 500P/1) .
		[1]	[acceleration]	0 : Capstan servo re-locks in deceleration mode.
			(DVW-A500P/1 and	1 : Capstan servo re-locks in acceleration mode.
			500P/1)
304	EDIT FIELD	[0]	[1F]	Specifies the timing for the start of editing in an edit mode.
	SELECT	1	2F	0 : Tape editing starts from field 1 and ends at field 2.
		2	1F/2F	1 : Tape editing starts from field 2 and ends at field 1.
				2 : Tape editing is carried out according to the timing of
				commands.
305	SYNC GRADE	[0]	[accurate]	Specifies the editing accuracy when performing editing in
		1	rough	phase-synchronized mode when the item 004 is set to “0”.
				0 : Editing accuracy of ±0 frame
				1 : Editing accuracy of ±1 frame
				For details on item 004, refer to page A-8.
306	DMC INITIAL	[00]	[manual]	Specifies the initial tape speed that is set automatically
	SPEED	01	play	during DMC (Dynamic Motion Control) editing.
		02	still	00 : The initial tape speed is determined by the rotation
		03	+0.03	angle of the search dial.
		04	+0.1	01 : Normal playback speed
		05	+0.2	02 : Tape is stopped.
		06	+0.5	03 to 13 : The initial tape speed is the selected search
		07	+1	speed.
		08	+2
		09	–0.03
		10	–0.1
		11	–0.2
		12	–0.5
		13	–1

Appendix

Appendix A-15