Sony manual 125

Item number	Item	Settable range			Function
006	LOCAL FUNCTION	0	all disable		Selects which buttons on the control panel are enabled,
	ENABLE	[1]	[stop & eject]		when this unit is in the remote control mode.
		2	all enable		0: All switches and buttons are disabled.
					1: Only the STOP and EJECT buttons are enabled.
					2: All switches and buttons except the RECORDER button
					and PLAYER button are enabled.
007	TAPE TIMER	[0]	[+/–12H]		Determines whether the CTL counter displays a 12-hour or
	DISPLAY	1	24H		24-hour clock.
					0: 12-hour clock
					1: 24-hour clock
008	MONITORING	[0]	[recorder only]		In two-VTR editing system when only one monitor is
	SELECTION FOR	1	auto switch		connected to the recorder, selects whether the recorder
	VTR-TO-VTR				automatically changes to E-E mode and outputs the player’s
	EDIT				playback signal on the monitor whenever the recorder’s
					PLAYER button is pressed.
					0: The recorder does not change to E-E mode.
					1: The recorder change to E-E mode to and outputs the
					playback signal of the player.
009	CHARACTER	[0]	[white]		Determines the type of superimposed characters output from
	TYPE	1	black		the SERIAL V/A OUTPUT 4(SUPER) or VIDEO OUTPUT
		2	W/out		COMPOSITE 3(SUPER) connector.
		3	B/out		0: White letters on a black background
					1: Black letters on a white background
					2: White outline letters
					3: Black outline letters
011	CHARACTER	[01]	[⋅ 1]		Determines the vertical size of superimposed characters
	V-SIZE	02	⋅	2	output from the SERIAL V/A OUTPUT 4(SUPER) or VIDEO
	CONDITION	03	⋅	3	OUTPUT COMPOSITE 3(SUPER) connector.
		04	⋅	4	01: Standard size
					02: Two times standard size
					03: Three times standard size
					04: Four times standard size
012	CONDITION	[0]	[disable]		Determines whether or not to include the display of the
	DISPLAY ON	1	enable		channel condition with the superimposed characters.
	VIDEO				0: Does not display the condition.
	MONITOR				1: Displays the condition.
					How the channel condition display format:
					The condition is displayed below the timer or status line of
					the characters. (The entire area for displaying the condition
					is blank when an analog tape is inserted.)	Appendix
					each video channel from Ach to Dch of the rotary head.
					Example: V–– – – A– –– –
					The four characters following “V” indicate the condition of
					The four characters following “A” indicate the condition of
					each audio channel from Ach to Dch of the rotary head.
					Character pattern
					(Space): The condition is not indicated on the front panel
					(STBY OFF, etc.).
					– : The condition is good (the green indicator lights up).
					* : The condition is less than good (the yellow indicator
					lights up).
					p : The condition is bad (the red indicator lights up).

Appendix A-9