Menu List

Appendix

Item number

Item

Settable range

Function

606

TC OUTPUT

[0]

[off tape]

Specifies the signal output to the TIME CODE OUT

 

SIGNAL IN REGEN

1

regen

connector when the internal time code generator is in a

 

MODE

 

 

mode for regenerating the playback time code (i.e., when

 

 

 

 

the [F6] (TCG SOURCE) button in the TC menu is set to int

 

 

 

 

and the [F7] (TCG MODE) button is set to regen, or when

 

 

 

 

the VTR is in the automatic edit mode).

 

 

 

 

0 : The playback time code signal is output to the TIME

 

 

 

 

CODE OUT connector without regeneration.

 

 

 

 

1 : The playback time code signal is output to the TIME

 

 

 

 

CODE OUT connector after regeneration only when the

 

 

 

 

VTR is in playback mode.

 

 

 

 

 

 

607

U-BIT BINARY

[0]

[000: not specified]

Specifies the user bit in the time code signal that is

 

GROUP FLAG

1

001: iso character

generated by the time code generator.

 

 

2

010: unassigned-1

0: Character setting is not specified.

 

 

3

011: unassigned-2

1: 8-bit character in compliance with ISO 646 and ISO

 

 

4

100: unassigned-3

2022.

 

 

 

5

101: page/line

2: Unassigned

 

 

6

110: unassigned-4

3: Unassigned

 

 

7

111: unassigned-5

4: Unassigned

 

 

 

 

5: Page/line multiplexed system of SMPTE 262M

 

 

 

 

6: Unassigned

 

 

 

 

7: Unassigned

 

 

 

 

 

608

PHASE

[0]

[off]

Specifies whether the phase correction control of the LTC

 

CORRECTION

1

on

signal generated by the time code generator is applied or

 

 

 

 

not.

 

 

 

 

0: The phase correction control is not applied.

 

 

 

 

1: The phase correction control is applied.

 

 

 

 

 

 

609

TCG CF FLAG

[0]

[off]

Specfies whether the color frame (CF) flag is set (ON) or

 

 

1

on

 

 

not set (OFF) in the blank bit of the time code data.

 

 

2

auto

 

 

0: Color frame flag is set OFF.

 

 

 

 

1: Color frame flag is set ON.

 

 

 

 

2: Color frame flag is set ON or OFF depending on the

 

 

 

 

phase relationship of the color framing between the

 

 

 

 

recorded video signal and the time code signal.

Note

When this item is set to “2”, the color frame flag is determined by the operating mode of the time code generator.

• When INT PRESET mode (i.e., the EXT/INT switch is set to int, the REGEN/PRESET switch to prst, and the VTR is in a mode other than automatic edit mode), the time code signal is generated with color frame-locked to the video signal, and the color frame flag is ON.

• When INT REGEN mode (i.e., when the EXT/INT switch is set to int, the REGEN/PRESET switch to regen, and the VTR is in automatic edit mode), or EXT mode (i.e., EXT/INT switch is in ext), color frame flag is OFF.

A-22Appendix