Sony Signals Being Recorded, Recording with emphasis, 5-1Preparing for Recording, Playback of Video and Audio, 5-1-5Recording Analog Audio

Recording/Playback 5 Chapter

5-1 Preparing for Recording

5-1-4 Monitoring SimultaneousPlayback of Video and AudioSignals Being RecordedMonitoring signals being recorded

To monitor audio and video signals currently being recorded, press the HOME button, then select on by pressing the [F2] (CONFI) button.

You can also set the VTR to play back the section of tape before and after the edit portion with the CONFI heads during editing.

For details, refer to “4-2-2 Simultaneous Playback During Recording (CONFI)” on page 4-14.

Monitoring previously recorded video and audio signals while recording

To monitor previously recorded audio and video signals while recording (preread function), press the [F1] (PRE READ) button while holding down the SFT button in the HOME menu.

For details, refer to “4-2-1 Setting the Preread Function (PRE READ)” on page 4-14.

5-1-5 Recording Analog AudioRecording with emphasis

You can emphasize analog audio signals that are recorded from the ANALOG AUDIO INPUT connectors. By emphasizing signals during recording, then de-emphasizing them during playback, high frequency noise can be suppressed without affecting the original signal.

To record with emphasis, select on by pressing the [F7] (EMPHASIS) button in the PF2 menu (factory setting).

The signals recorded with emphasis are automatically de-emphasized during playback regardless of the setting of the [F7] (EMPHASIS) button.

5-4Chapter 5 Recording/Playback