Sony manual 141

Item number	Item		Settable range		Function
704	DECODE Y/C
(DVW-A500/1	SEP MODE
and 500/1 with
optional
accessory
BKDW-505)
	Sub item
	12	Line 12	0	BPF	Specifies the Y/C separation mode during vertical blanking.
	I	I	[1]	[B & W]	Can be specified independently for each line from line 12 to
	20	Line 20			20. Valid only when the BKDW-505 Analog Composite
					Decoder Board is installed.
					0: Signals are processed as Y/C.
					1: Signals are processed as luminance signals.
704	DECODE Y/C
(DVW-A500P/1	SEP MODE
and 500P/1 with
optional
accessory
BKDW-506)
	Sub item
	9	Line 9.332	0	BPF	Specifies the Y/C separation mode during vertical blanking.
	I	I	[1]	[B & W]	Can be specified independently for each line from line 12 to
	22	Line 22.335			20. Valid only when the BKDW-506 Analog Composite
					Decoder Board is installed.
					0: Signals are processed as Y/C.
					1: Signals are processed as luminance signals.
705	EDGE		[0]	[auto]	During recording and playback of composite signals, the
	SUBCARRIER		1	forced ESR on	ESR (Edge Subcarrier Reducer) automatically goes on or
	REDUCER MODE				off, depending on the VTR operation. Through this item,
					the ESR can also be set to stay on all the time when the
					color edge has more noise, as when recording a non-
					standard signal.
					0: The ESR turns on and off automatically.
					1: The ESR stays on all the time.
706	VERTICAL		[0]	[on]	During the Y-add operation mode, the playback signal is
	BLANKING V		1	off	shifted by 1H to suppress vertical movement of the
	SHIFT				playback picture when the playback is an odd field and the
					reference signal an even field.
					This item is specified whether the 1H shift is applied or not
					during the V-blanking period. If it is, the video playback
					signal appears sporadically on line 21 during DT playback.
					0: The shift is applied during V-blanking.
					1: The shift is not applied during V-blanking.
					Note
					In a Y-add operation, vertical interpolation is conducted
					during DT playback in order to decrease vertical movement
					of the playback picture.
707	FORCED		[0]	[auto]	Specifies whether Y-add operation mode is automatically
	VERTICAL		1	forced YADD off	turned on during DT playback or not.
	INTERPORATION				0: Y-add operation mode is automatically turned on.
	OFF				1: Y-add operation mode is off all the time.

Appendix

Appendix A-25