Sony manual 158

Appendix

Menu List

Item number	Item	Settable range		Function
K44	CUE MENU	[0]	[page mode]	Selects the default mode to be activated when you activate
	DEFAULT MODE	1	extend mode	the CUE menu.
	SEL			0: PAGE mode
				1: EXTEND mode
K45	CUE MENU PRE-	[0]	[0 sec]	Specifies the preroll time to a cue point.
	ROLL OFFSET	1	1 sec	You can set a preroll time of 0 to 30 seconds in 1-second
		I	I	units.
		30	30 sec
K46	POWER-ON	[0]	[HOME menu]	Selects the menu to be activated automatically when you
	MENU SELECT	1	TC menu	turn on the power.
		2	CUE menu
		3	PF1 menu
		4	PF2 menu

Item assignable to PF1 and PF2 menus are items 001			Item K61 to K76 does not appear in the VTR SETUP
to 910, K1 to K46 which are included in the VTR			menu, and the settings of these items return to their
SETUP menu, and K61 to K76 described below. They			factory settings when you turn the power off.
all appear in the PF ASSIGN menu.
Item number	Item	Function
K61	ASSEMBLE	Selects assemble editing.
K62	INS TC	Selects the insert channel(s) for insert editing.
K63	INS VIDEO
K64	INS A-CH1
K65	INS A-CH2
K66	INS A-CH3
K67	INS A-CH4
K68	INS A-CH CUE
K69	FREEZE	A still-picture is output when you press the function button which this item is registered.
K70	DMC	Register this item to a function button in the PF1/2 menu and press the button to
		record, automatically play and automatically edit a signal played back at speed
		between –1 to +3 times normal playing speed.
K71	P-PLAY
K73	LAST EDIT
K74	TIMER RESET	Resets the internal time code generator.
		CTL: The time data display becomes 00H00M00S00F and all edit points are erased.
		TC or UBIT: The time data display becomes 00H00M00S00F (TC) or 00 00 00 00
		(UBIT). Edit points are not affected.
K75	TIMER SET	Register this item to a function button in the PF1/2 menu and press the button to set
		the desired time code or user bits.
K76	TIMER HOLD	Register this item to a function button in the PF1/2 menu and press the button to stop
		advancing the time data.

A-42Appendix