Menu List

Appendix

Item number

Item

Settable range

Function

307

AUTO-DELETION

[0]

[manual]

Specifies the action taken when an edit point is incorrectly

 

FOR

1

neg & excess

set.

 

INCONSISTENT

2

neg

0 : a warning message is output on the display on the lower

 

DATA

 

 

control panel. Delete manually the unnecessary edit

 

 

 

 

points or correct the erroneous edit point manually.

 

 

 

 

1 : When an incorrect edit point is set, (i.e., an OUT point

 

 

 

 

located before an IN point, or AUDIO OUT point before

 

 

 

 

AUDIO IN point) the previously set edit point is deleted

 

 

 

 

automatically.

 

 

 

 

When excessive edit points are set, the previously set

 

 

 

 

edit point is deleted automatically.

 

 

 

 

2 : When an incorrect edit point is set (i.e., an OUT point

 

 

 

 

located before an IN point, or AUDIO OUT point located

 

 

 

 

before AUDIO IN point) the previously set edit point is

 

 

 

 

deleted automatically.

 

 

 

 

When excessive edit points are set, a warning message

 

 

 

 

appears in the display on the lower control panel.

 

 

 

 

Note

 

 

 

 

 

Editing is not performed on the VTR while a warning

 

 

 

 

message aprears in the display.

 

 

 

 

 

308

SELECTION OF

[0]

[auto]

Select the STD or NON-STD signal mode according to the

(with optional

STD/NON-STD

1

forced STD

composite video input signal.

BKDW-505 for

FOR COMPOSITE

2

forced non-STD

0 : Detect automatically whether the input luminance signal

DVW-500/1

VIDEO IN

 

 

and chrominance signal are interleaved or not. If

series, and

 

 

 

interleaved, the STD mode is selected. If not

BKDW-506 for

 

 

 

interleaved, the NON-STD mode is selected.

DVW-500P/1

 

 

 

1 : The unit is in the STD mode at all times.

series)

 

 

 

2 : The unit is in the NON-STD mode at all times. Use this

 

 

 

 

mode when color framing of the video input signal is not

 

 

 

 

stable.

 

 

 

 

 

309

SERVO/AV

[0]

[auto 1]

The servo reference is selected by the following settings.

 

REFERENCE SEL

1

auto 2

0: During recording, the analog component/composite or

 

 

2

external

digital video input signal is selected as the servo

 

 

 

 

reference signal.

 

 

 

 

During playback, the signal selected by the [F2] (OUT

 

 

 

 

REF) button in the PF1 menu (factory setting) on the

 

 

 

 

lower control panel is selected as the servo reference

 

 

 

 

signal. When the signal selected by the [F2] (OUT REF)

 

 

 

 

button in the PF1 menu (factory setting) on the lower

 

 

 

 

control panel is not connected, the internal reference

 

 

 

 

signal is selected.

 

 

 

 

1: When the [F2] (OUT REF) button in the PF1 menu is set

 

 

 

 

to “ref”, and the unit is in edit preset mode, the reference

 

 

 

 

signal for video/audio signal processing is locked to the

 

 

 

 

video input signal.

 

 

 

 

2: SYS1 ROM version 1.06 and higher

 

 

 

 

The servo reference is forced into the EXT mode.

A-16Appendix