Sony Menu List, Items Related to Operation Panels (100s)

Appendix

Menu List

Items Related to Operation Panels (100s)

The values enclosed in a box one factory settings.

Item number	Item	Settable range		Function
101	SELECTION	[0]	[dial direct]		Determines how the unit is set to search mode.
	FOR SEARCH	1	via search key		0: The unit enters search mode when you rotate the search
	DIAL ENABLE				dial in all modes except recording and edit modes.
					1: The unit enters search mode when you press the
					SHUTTLE, JOG or VAR button.
102	MAXIMUM TAPE	[0]	[⋅ 35]		Selects the maximum analog Betacam tape speed in
(DVW-A500/1)	SPEED	1	⋅ 35 (shuttle ⋅ 24)		search mode.
		2	⋅ 24
					Note
					The maximum digital Betacam tape speed in search mode
					is 50 times normal tape speed no matter what this setting is.
					0: 35 times normal tape speed in shuttle mode using the
					search dial and during fast forward and rewind.
					1: 35 times normal tape speed during fast forward and
					rewind. 24 times normal tape speed in shuttle mode
					using the search dial.
					2: 24 times normal tape speed in shuttle mode using the
					search dial and during fast forward and rewind.
102	MAXIMUM TAPE	[0]	[⋅ 42]		Selects the maximum analog Betacam tape speed in
(DVW-A500P/1)	SPEED	1	⋅ 42 (shuttle ⋅ 24)		search mode.
		2	⋅ 24
					Note
					The maximum digital Betacam tape speed in search mode
					is 50 times normal tape speed no matter what this setting is.
					0: 42 times normal tape speed in shuttle mode using the
					search dial and during fast forward and rewind.
					1: 42 times normal tape speed is the maximum tape speed
					during fast forward and rewind. 24 times normal tape
					speed in shuttle mode using the search dial.
					2: 24 times normal tape speed in shuttle mode using the
					search dial and during fast forward and rewind.
103	AUDIO SELECTED	[0]	[manual]		Selects the audio signal output to the MONITOR OUTPUT
(DVW-A500/1	LINE OUT	1	auto AFM/LNG		connectors.
and A500P/1)		2	select		0: The audio signal selected by the AUDIO INPUT/
			auto LNG select		MONITOR SELECT buttons on the upper control panel
					or the[F9](MON-L SEL) or [F10](MON-R SEL) button in
					the PF2 menu factory setting) is output to the MONITOR
					OUTPUT connectors.
					1: The AFM audio (CH-3 and CH-4) is selected during
					metal tape playback. The LNG audio (CH-1 and CH-2) is
					selected during oxide tape playback. Signal output is in
					stereo.
					2: The audio signal selected by the AUDIO INPUT
					MONITOR SELECT buttons on the upper control panel
					or the [F9] (MON-L SEL) or [F10] (MON-R SEL) button in
					the PF2 menu (factory setting) is output to the MONITOR
					OUTPUT connectors. When the AFM audio is selected,
					the LNG audio is output to the MONITOR OUTPUT
					connector automatically when the variable speed
					playback mode is activated.

A-10Appendix