Sony Video, DVW-A500/1, DVW-A500P/1, Specifications, Analog input to output, Analog audio (Cue track), Digital audio (CH-1to CH-4)

SpecificationsAnalog composite input (with optional BKDW- 505/506) to analog composite output

Bandwidth	Y: 0 to 5.75 MHz +0.5 dB/–0.7 dB
S/N ratio	58 dB or more1)
Differential gain	2% or less
Differential phase	2° or less
Y/C delay	15 ns or less
K factor (2T Pulse)
	1% or less
Output SCH phase
	Based upon RS-170A/CCIR
	R.624-3

Analog audio (Cue track)

Frequency response

	100 Hz to 12 kHz ±3 dB
S/N ratio	More than 45 dB (at 3% distortion
	level)
Distortion	Less than 2% (T.H.D at 1 kHz
	reference level2))
Wow and flutter	DVW-A500/1 and 500/1: Less
	than 0.2% rms
	DVW-A500P/1 and 500P/1: Less
	than 0.2% (DIN 45507 weighted)

Appendix

Digital audio (CH-1 to CH-4)

Sampling frequency

	48 kHz (synchronized with video)
Quantization	20 bits/sample
Wow and flutter	Below measurable level
Headroom	20 dB (or 18 dB selectable)
Emphasis	T1=50 µs, T2=15 µs (on/off
	selectable in recording mode)

Analog input to output

A/D, D/A quantization

18bits/sample

Frequency response

	20 Hz to 20 kHz +0.5 dB/–1.0 dB
	(0 dB at 1 kHz)
Dynamic range	More than 95 dB (at 1 kHz,
	emphasis on)
Distortion	Less than 0.05% (at 1 kHz,
	emphasis on, reference level2))
Crosstalk	Less than –80 dB (at 1 kHz,
	between any two channels)

Betacam SP playback (for DVW-A500/1 and A500P/1 only)Video

DVW-A500/1

	Metal Tape	Oxide Tape
Bandwidth Y	30 Hz to 4.5 MHz	30 Hz to 4.1 MHz
	+0.5 dB/–3.0 dB	+0.5 dB/–6.0 dB
Bandwidth R-Y/B-Y	30 Hz to 1.5 MHz	30 Hz to 1.5 MHz
	+0.5 dB/–3.0 dB	+0.5 dB/–3.0 dB
S/N Ratio Y	51 dB or more	48 dB or more
S/N Ratio R-Y/B-Y	48 dB or more	45 dB or more
K factor (2T pulse)	2% or less	3% or less
LF non-linearity Y	3% or less
LF non-linearity	4% or less
R-Y/B-Y
Y/C delay	20 ns or less

DVW-A500P/1

	Metal Tape	Oxide Tape
Bandwidth Y	25 Hz to 5.5 MHz	25 Hz to 4.0 MHz
	+0.5 dB/–3.0 dB	+0.5 dB/–6.0 dB
Bandwidth R-Y/B-Y	25 Hz to 2.0 MHz	25 Hz to 1.5 MHz
	+0.5 dB/–3.0 dB	+0.5 dB/–3.0 dB
S/N Ratio Y	48 dB or more	46 dB or more
S/N Ratio R-Y/B-Y	48 dB or more	45 dB or more
K factor (2T pulse)	1.5% or less	3% or less
LF non-linearity Y	3% or less
LF non-linearity	4% or less
R-Y/B-Y
Y/C delay	20 ns or less

..........................................................................................................................................................................................................

1) measured in video setup 0% mode for the BKDW-505 as	2) Reference level: + 4 dBm
well.

A-2Appendix