Sony manual 152

Appendix

Menu List

Item number	Item	Settable range		Function
907a)	PITCH	[0]	[on]	Specifies whether the pitch correction is conducted in
(with optional	CORRECTION	1	off	digital audio signal processing during playback in program
BKDW-507)	IN P.PLAY			play mode.
				0 : Pitch correction is conducted.
				1 : Pitch correction is not conducted.
				When the pitch correction is not conducted, an audio signal
				whose pitch changes according to the tape speed is output
				from SIF, AES/EBU, and ANALOG AUDIO OUTPUT
				connectors.
				However, the sampling rate for digital audio output (SIF and
				AES/EBU) signals are converted (rate-converted) to 48 kHz.
908a)	PITCH DET FOR	0	ch1	Pitch information (musical interval) is necessary for
(with optional	CH1/CH2 IN	1	ch2	carrying out pitch correction of digital audio signals in
BKDW-507)	P.PLAY	[2]	[ch1+ch2]	channels 1 and 2. This item specifies the channel from
				which this information is detected.
				Pitch correction is simultaneously executed in channels 1
				and 2 according to the detected information.
				0 : Detects the pitch information from the audio signal in
				channel 1.
				1 : Detects the pitch information from the audio signal in
				channel 2.
				2 : Detects the pitch information from the average of the
				audio signals in channels 1 and 2.
909a)	PITCH DET FOR	0	ch3	Pitch information (musical interval) is necessary for carrying
(with optional	CH3/CH4 IN	1	ch4	out pitch correction of digital audio signals in channels 3
BKDW-507)	P.PLAY	[2]	[ch3+ch4]	and 4. This item specifies the channel from which this
				information is detected.
				Pitch correction is simultaneously executed in channels 3
				and 4 according to the detected information.
				0 : Detects the pitch information from the audio signal in
				channel 3.
				1 : Detects the pitch information from the audio signal in
				channel 4.
				2 : Detects the pitch information from the average of the
				audio signals in channels 3 and 4.
910a)	PLAY MODE	[0]	[p.play 0 % ]	Specifies the operation of the VTR when it changes from
(with optional	AFTER P.PLAY	1	normal play	program play mode to play mode.
BKDW-507)				0 : The speed deviation of 0% of program play mode is
				maintained for video and audio signals even when
				changing to play mode.
				1 : When changing to play mode, the servo is re-locked to
				the reference signal. Some disturbance in the audio and
				video signals will occur at this time.
				To prevent picture disturbance when the VTR changes
				from program play mode to mode other than play mode,
				set items 905 and 906 to a setting other than “disable”.

a) This item is displayed when the BKDW-507 is installed.

A-36Appendix