Basic Procedures of Sampling

The basic procedures for sampling follow below. You can find the detailed explanation for each step on the pages in parentheses.

In the acoustic space where you sample

1Install the microphones and speakers. (page 5) x

2Start running the DASK-S704. (page 7) x

3Set the sampling frequency/period (Fs/Period), and repeat times (Repeat) on the SETUP display. (page 12)

x

4Rehearsal: Adjust the input level from the microphones. (page 11) x

5Sampling: Record the reverb data. (page 12)

x

6Write the sampled data on the Memory Stick. (page 15)

In the recording studio, etc.

7Recall the sampled data from the Memory Stick. (page 18)

x

8Compile: Work on the sampled data to form the reverb program. (page 18)

x

9Write the compiled reverb program data on the Memory Stick. (page 23)

x

0Reproduce the reverb program using the sampling reverb software CD- ROM (Version 2.0). (page 30)

3(GB)