Starting the DASK-S704

5 Insert the CD-ROM, and lightly press the front end of the CD tray or the Z key to close the tray.

With the label facing up

The DRE-S777 starts running and the DASK-S704 Sampling Function Software is loaded from the CD-ROM. The loading is complete within about 3 minutes. After loading, the DASK-S704 initial display appears.

 

 

￿

 

MS:xxxxxxxx 24MB Available￿

 

 

Rehearsal

￿

Fs/Period=Fs/5.5sec￿

 

 

Sampling￿

 

Repeat

=16￿

 

 

Compile￿

 

Input

=AD￿

 

 

 

 

 

 

 

Change MS

 

Clock

=Internal 48.0 kHz

 

 

 

 

 

 

 

 

SAMPLE

 

 

 

Enter

 

 

 

 

 

 

 

Removing the Memory Stick

1

2

Press the EJECT button on the PC card adapter.

Remove the Memory Stick.

EJECT button

2 1

To use the Memory Stick again

Reinsert it into the slot of the PC card adapter.

Notes

•You can remove the Memory Stick or the PC card adapter in the following cases only:

—When the DRE-S777 is turned off.

—When a message on the display indicates changing the Memory Stick, such as “Please change MS.”

To avoid damaging the data in the Memory Stick, do not remove the Memory Stick or the PC card adapter in other cases.

•Do not remove the Memory Stick immediately after it is inserted. As it will take about five seconds for the unit to recognize the inserted Memory Stick, quick removal of the Memory Stick will cause an error, freezing the system. If the system is stopped, turn off the power and turn it on again.

8(GB)