Sony DASK-S704 To store in another Memory Stick, To store in the Memory Stick in use

4 Press the F4 key.

“Please wait for a few seconds.” is displayed, and sampling is performed. The TSP (Time Stretched Pulse) signal is output, and sampling is repeated by the set repeat times.

	￿					IN	OUT
						1 2	DV 1 2
	Rehearsal￿		￿
			Now sampling￿				0
	Sampling￿						-6
	Compile￿			12/16			-20
							-35
	Change MS						-60
SAMPLE		PeakHold			Exit	Enter

Sampling repeat times

When sampling is completed, “Finish sampling Please wait for a few seconds.” is displayed. Then the following display appears.

￿
Rehearsal￿	Save sampled data to￿
Sampling￿	MS [xxxxxxxx]?￿
Compile￿
	or Change MS and Press F2
Change MS

SAMPLE Change MS Exit Enter

5 Assign the Memory Stick in which you want to store the sampled data. Select the Memory Stick in use or another Memory Stick.

Name of the Memory Stick in use

￿
Rehearsal￿	Save sampled data to￿
Sampling￿	MS	[xxxxxxxx]?	￿
Compile￿
	or Change MS and Press F2
Change MS

SAMPLE Change MS Exit Enter

To store in the Memory Stick in use

Press the F4 key. The memory list of the Memory Stick is displayed. Proceed to step 6.

To store in another Memory Stick

1Change the Memory Stick to another one.

2Press the F2 key.

“Checking MS Please wait for a few minutes.” is displayed, then the display in step 5 appears.

3Press the F4 key.

The memory list of the Memory Stick is displayed. Proceed to step 6.

Notes

•If the capacity of the Memory Stick in use is not sufficient, “No Space on MS[xxxxxxxx] Delete files or Change MS and Press F2” is displayed. Delete unnecessary files in the Memory Stick or change the Memory Stick.

For details, see “If the memory capacity of the Memory Stick is not sufficient” on page 16.

•If you insert a new Memory Stick, “This MS is new Press F4 and enter name of MS” is displayed. Name the Memory Stick.

For details, see “To name a new Memory Stick” on page 17.

(continued)

13(GB)