Sampling

After the microphone input level has been adjusted in rehearsal, perform sampling of the reverberation.

Note

The background noise in the sampling space will be recorded over the reberveration. When sampling, choose a situation with as little background noise as possible. If noise occurs during sampling, i.e. noise from a plane, car, human voice, bird voice, etc., retry sampling from the beginning.

1 Confirm the sampling conditions on the initial display of the DASK- S704.

If necessary, change the conditions on the SETUP display.

Sampling frequency and period

 

 

￿

 

MS:xxxxxxxx 24MB Available￿

 

 

 

 

 

 

 

 

 

 

 

 

Rehearsal

￿

Fs/Period=Fs/5.5sec

￿

 

 

 

 

 

Repeat

 

 

 

 

 

 

Sampling￿

 

=16￿

 

 

 

 

 

 

 

Input

 

 

 

 

 

 

Compile￿

 

=AD￿

 

 

Change MS

 

Clock

=Internal 48.0 kHz

 

 

 

 

 

 

 

 

 

 

 

SAMPLE

 

 

 

 

 

 

Enter

 

 

 

 

 

 

 

 

 

 

Sampling repeat times

Sampling frequency and period: Normally set to Fs/5.5sec or 2Fs/ 5.5sec. When sampling in a space with a long reberveration time such as a church, set it to Fs/11sec and perform sampling. Compile the sampled data once to check the sampling result, then check if the setting is to be changed or not.

Sampling repeat times: Normally set to 16. When sampling outdoors where there is usually much background noise, perform sampling with the setting at 16, compile the sampled data once to check the sampling result, then check if the setting is to be changed or not. Set to 1 when sampling digital reverb sound or when noise level reduction by the synchronized addition is not required.

Note

The DABK-S703 expansion DSP (optional) is required when sampling with the Fs/11sec or 2Fs/5.5sec setting.

For setting on the SETUP display, see page 27.

2 Turn the jog dial to highlight “Sampling.”

 

 

￿

 

MS:xxxxxxxx 24MB Available￿

 

 

Rehearsal￿

Fs/Period=Fs/5.5sec￿

 

 

Sampling￿

 

Repeat

=16￿

 

 

Compile￿

 

Input

=AD￿

 

 

 

 

 

 

 

Change MS

 

Clock

=Internal 48.0 kHz

 

 

 

 

 

 

 

 

SAMPLE

 

 

 

Enter

 

 

 

 

 

 

 

3 Press the F4 key.

“Loading CDROM/MS” is displayed, then “Start sampling?” appears.

 

 

￿

 

 

 

 

Rehearsal￿

 

 

 

 

 

 

 

 

 

 

Sampling￿

 

Start sampling ?

 

 

Compile￿

 

 

 

 

 

 

Change MS

 

 

 

 

 

 

 

SAMPLE

 

Exit

Enter

 

 

 

 

 

 

 

12(GB)