Change the Memory Stick as required.

Changing the Memory Stick

You can change the Memory Stick without turning off the power, using “Change MS” on the initial display.

1

2

Show the initial display of the DASK-S704.

Turn the jog dial to highlight “Change MS.”

 

 

￿

 

MS:xxxxxxxx 24MB Available￿

 

 

Rehearsal￿

Fs/Period=Fs/5.5sec￿

 

 

Sampling￿

 

Repeat

=16￿

 

 

Compile￿

 

Input

=AD￿

 

 

 

 

 

Clock

=Internal 48.0 kHz

 

 

Change MS

 

 

 

 

 

 

 

 

 

SAMPLE

 

 

 

Enter

 

 

 

 

 

 

 

3 Press the F4 key.

The following display appears.

 

 

￿

 

 

 

 

 

 

Rehearsal￿

Please Change MS￿

 

 

 

Sampling￿

 

 

 

 

 

 

and Press F4

 

 

Compile￿

 

 

 

 

 

 

 

 

 

 

Change MS

 

 

 

 

 

 

 

 

 

 

SAMPLE

 

Change MS

Exit

Enter

 

 

 

 

 

 

 

 

4

5 Press the F4 key.

“Checking MS Please wait for a few minutes.” is displayed, then the initial display resumes.

Notes

When a Memory Stick is changed, “Please insert MS” message may appear if the DRE-S777 cannot recognize the Memory Stick. In this case, press the F4 key again.

If you insert a new Memory Stick, “This MS is new Press F4 and enter name of MS” is displayed. Name the Memory Stick.

For details, see “To name a new Memory Stick” on page 17.

26(GB)