Viewing images recorded on a tape on your computer (Windows users only)

Installing the USB driver

Before connecting your camcorder to your computer, install the USB driver on the computer. The USB driver is packaged together with application software for viewing images on the CD-ROM supplied with your camcorder.

Start the following operation without connecting the USB cable to your computer.

Connect the USB cable in step 8.

If the USB driver has been registered incorrectly because your computer was connected to your camcorder before installation of the USB driver was complete, reinstall the USB driver following the procedure on page 128.

For Windows 98SE, Windows Me, Windows 2000 Professional, Windows XP users

If you are using Windows 2000 Professional or Windows XP, log in with permission of administrator.

(1) Turn on your computer and allow Windows to load.

(2) Insert the supplied CD-ROM into the CD- ROM drive of your computer. The application software screen appears.

(3) Move the cursor to “USB Driver” and click. This starts USB driver installation.

Bandopnamen bekijken met uw personal computer (alleen voor gebruikers van Windows)

Het USB stuurprogrammainstalleren

Alvorens u de camcorder aansluit op uw personal computer, zult u eerst het USB stuurprogramma moeten installeren op uw computer. Het USB stuurprogramma is bijgeleverd, samen met een toepassingsprogramma voor het weergeven van de beelden, op de CD-ROM die bij uw camcorder is meegeleverd.

Volg de onderstaande aanwijzingen, zonder dat de USB-kabel op uw computer is aangesloten.

De USB-kabel moet pas worden aangesloten in stap 8.

Als het USB stuurprogramma niet juist

geïnstalleerd is, omdat de camcorder al op uw computer werd aangesloten voordat de installatie van het USB stuurprogramma helemaal voltooid was, zult u het USB stuurprogramma opnieuw moeten installeren volgens de aanwijzingen op blz. 128.

voor gebruikers van Windows 98 Tweede editie, Windows Me, Windows 2000 Professional of Windows XP

Bij Windows 2000 Professional of Windows XP meldt u zich eerst aan als beheerder.

(1) Schakel uw computer in zodat Windows gestart wordt.

(2) Plaats de bijgeleverde CD-ROM in het CD- ROM station van uw personal computer. Het openingsscherm van het toepassingsprogramma verschijnt.

(3) Plaats de cursor op de regel “USB Driver” en klik daarop. Dan start de installatie van het USB stuurprogramma.

126