Viewing images recorded on “Memory Stick”s on your computer

Note

You cannot install the USB driver if a “Memory Stick” is not in your camcorder.

Be sure to insert a “Memory Stick” into your camcorder before installing the USB driver.

If you cannot install the USB driver

The USB driver has been registered incorrectly as your computer was connected to your camcorder before installation of the USB driver was completed. Perform the following procedure to correctly install the USB driver.

Step1: Uninstall the incorrect USB driver

1Turn on your computer and allow Windows to load.

2Insert a “Memory Stick” into your camcorder.

3 Connect the AC power adaptor, and set the POWER switch to MEMORY.

4 Connect the USB connector on your computer to the (USB) jack on your camcorder using the USB cable supplied with your camcorder.

5 Open your computer’s “Device Manager”. Windows 2000 Professional:

Select “My Computer” t “Control Panel” t “Hardware” tab, and click the “Device Manager” button.

Other OS:

Select “My Computer” t “Control Panel” t “System”, and click “Device Manager”.

6 Select “Other devices”.

Select the device prefixed with the “?” mark and delete.

Ex: (?)Sony Camcorder

7 Turn the POWER switch to OFF (CHG), and then disconnect the USB cable.

8 Restart your computer.

Step2: Install the USB driver on the CD-ROM

Perform the entire procedure described in “Installing the USB driver” on page 208.

Beelden van een “Memory Stick” bekijken met uw personal computer

Opmerking

U kunt het USB stuurprogramma niet installeren zolang er geen “Memory Stick” in uw camcorder aanwezig is.

Plaats eerst een “Memory Stick” in uw camcorder alvorens u het USB stuurprogramma gaat installeren.

Als het installeren van het USB stuurprogramma niet lukt

Wellicht is het USB stuurprogramma niet juist geregistreerd, omdat uw computer werd aangesloten op de camcorder voordat de installatie van het USB stuurprogramma was voltooid. Volg de onderstaande aanwijzingen om het USB stuurprogramma naar behoren te installeren.

Stap 1: Verwijder het onjuist geïnstalleerde USB stuurprogramma

1Zet uw computer aan en wacht tot Windows

is gestart.

2Plaats een “Memory Stick” in uw camcorder.

3 Sluit de netspanningsadapter aan en zet de POWER schakelaar in de “MEMORY” stand.

4 Verbind de USB-aansluitbus van uw computer met de (USB) aansluitbus van uw camcorder met behulp van de USB-kabel die bij uw camcorder is meegeleverd.

5 Open het “Apparaatbeheer” venster van uw computer.

Windows 2000 Professional: Stel in op “Deze Computer” t

“Configuratiescherm” t “Hardware” tabblad en klik op de “Apparaatbeheer” knop. Ander besturingssysteem:

Stel in op “Deze Computer” t

“Configuratiescherm” t “Systeem” en klik op “Apparaatbeheer”.

6 Stel in op “Andere apparatuur”. Stel in op het apparaat met een “?” vraagteken er voor en verwijder dit apparaat. Bijv.: (?) Sony Camcorder

7 Zet de POWER schakelaar van de camcorder op “OFF (CHG)” en maak de USB-kabel los.

8 Start uw computer opnieuw op.

Stap 2: Installeer het USB stuurprogramma van de CD-ROM

Volg alle aanwijzingen onder “Het USB stuurprogramma installeren” op blz. 208.

210