Viewing images recorded on “Memory Stick”s on your computerFor Windows users

Recommended Windows environment

OS: Microsoft Windows 98, Windows 98SE, Windows Me, Windows 2000 Professional, Windows XP Home Edition or Windows XP Professional standard installation is required.

However, operation is not assured if the above environment is an upgraded OS.

CPU: MMX Pentium 200 MHz or faster

The USB connector must be provided as standard.

Windows Media Player must be installed (to play back moving pictures).

Installing the USB driver

Before connecting your camcorder to your computer, install the USB driver on the computer. The USB driver is packaged together with application software for viewing images on the CD-ROM supplied with your camcorder.

If you installed the USB driver in “Viewing images recorded on a tape on your computer” (p. 126), start from step 5.

For Windows XP users

The USB driver needs not be installed. Your computer is automatically recognized as a driver just by connecting your computer using the USB cable.

For Windows 98/98SE/Me, Windows 2000 Professional users

If you are using Windows 2000 Professional, log in with permission of administrator.

Start the following operation without connecting the USB cable to your computer.

Connect the USB cable in step 6.

If the USB driver has been registered incorrectly because your computer was connected to your camcorder before installation of the USB driver was completed. Reinstall the USB driver following the procedure on page 210.

208

Beelden van een “Memory Stick” bekijken met uw personal computerVoor Windows gebruikers

Aanbevolen Windows werkomgeving Besturingssysteem: Microsoft Windows 98,

Windows 98 Tweede editie, Windows Me, Windows 2000 Professional, Windows XP Home Edition of Windows XP Professional, standaard installatie is vereist. Er kan niet worden ingestaan voor de juiste werking met een door upgrade aangepast besturingssysteem.

Processor:MMX Pentium 200 MHz of sneller model

Er moet standaard zijn voorzien in een USB- aansluiting.

Het Windows Media Player programma moet zijn geïnstalleerd (voor de weergave van bewegende beelden).

Het USB stuurprogramma installeren

Alvorens u de camcorder aansluit op uw personal computer, zult u eerst het USB stuurprogramma moeten installeren op uw PC. Het USB stuurprogramma is bijgeleverd, samen met een toepassingsprogramma voor het weergeven van de beelden op een CD-ROM die bij uw camcorder is meegeleverd.

Als u het USB stuurprogramma al hebt geïnstalleerd zoals beschreven onder “Bandopnamen bekijken met uw personal computer” (op blz. 126), kunt u beginnen bij stap 5 hieronder.

Voor gebruikers van Windows XP

U hoeft geen USB stuurprogramma te installeren. Uw computer verkrijgt automatisch toegang tot de nodige bedieningsfuncties, zodra u de USB- kabel aansluit.

Voor gebruikers van Windows 98/98 Tweede editie/Me of Windows 2000 Professional

Als u Windows 2000 Professional gebruikt, moet u zich aanmelden als beheerder.

Volg de onderstaande aanwijzingen, zonder dat de USB-kabel op uw computer is aangesloten.

De USB-kabel moet pas worden aangesloten in stap 6.

Als het USB stuurprogramma niet juist

geïnstalleerd is, omdat de camcorder al op uw computer werd aangesloten voordat de installatie van het USB stuurprogramma helemaal voltooid was, zult u het USB stuurprogramma opnieuw moeten installeren volgens de aanwijzingen op blz. 210.