Playback and Recording 4 Chapter
Adjusting the audio recording levels
When carrying out audio recording at a reference level
Leave the REC controls pressed in. The audio signals will be recorded at a preset reference level (a reference 0 dB indication for an input of +4 dBm).
Manually adjusting the recording levels
For each channel, press to protrude the REC control in the upper control panel, and adjust so that the audio level indication is 0 dB for an average volume. Carry out the adjustment in
For details of selecting the
To change the display range of the audio level indications
Press the DISPLAY FULL/FINE button (see page
To monitor the simultaneous playback of the recorded video and audio signals
Set the CONFI to ENABLE (see page
To use the emphasis function
To add emphasis to the analog input audio signal or analog playback audio signal, set the EMPHSS to ON (see page
When the signal to which emphasis has been applied is played back, it is automatically subjected to deemphasis processing.
Using the
There are three ways of recording time code, as follows:
•Setting an initial value, then recording the output of the internal time code generator
•Recording the output of the internal time code generator synchronized to an external time code generator
•Recording the output of an external time code without modification
To set an initial value then record the time code
If necessary, change the settings in function menu page 1 (see page
Set the TCG (F1) to INT, and the TCG (F2) to
PRESET.
Chapter 4 Recording and Playback |