Removing slack from the tape
Press in one of the reels with a finger, and turn gently in the direction shown by the arrows until there is no slack in the tape.
Ejecting a cassette
Press the EJECT button.
Note
Ejecting is a local operation. It is not possible to eject a cassette in another unit by remote control.
If the tape slacks inside the unit, pressing the EJECT button may not eject the cassette. For information about how to remove the cassette in such a case, refer to Section
To prevent a tape from being inadvertently erased, press in the red record inhibit plug on the cassette.
Large cassette
Small cassette
Press in the red record inhibit plug. (“ON”)
Return this plug to its original position to enable recording on the tape again. (“OFF”)
Preparations 3 Chapter
Chapter 3 Preparations